YZG/FZG Series vacuum drier

it is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature

Note:if use condensator,the solvent in raw material can be recovered.If use SK series water ring vacuum pump or ZSWJ series hydraulic inject vacuum pump sets,condensator can not be used and the investment could be saved.FeaturesUnder the condition of vacuum,the boiling point of raw material will decrease and make the pushing force become greater.Therefore for a certain amount of heat radiation,the conducting area of evaporator can be saved; The heat source for operation of evaporation may be low pressure steam or surplus heat steam; The heat loss of evaporator is less; Before drying,the treatment of disinfection may be carried out.During the period of drying,there is no impurity material mixing.It is in conformity with the requirement of GMP; It belongs to static drier.So the shape of raw material to be dried can not be destroyed. Technical Parameters Technical ParametersName/specificationYZG-600 Φ×LYZG-800 Φ×LYZG-1000 Φ×LYZG-1400 Φ×LYZG-15 L×W×Hinside size of chamber(mm)600×976800×12741000×15271400×20541500×1400×1220size of chamber(mm)1153×810×10201700×1040×13351693×1190×15002386×1657×19201513×1924×2060layers of baking shelf44688layer of baking shelf(mm)8182102102122size of baking disk(mm)310×600×45460×600×45460×640×45460×640×45460×640×45number of baking disk48123232permitted pressure inside the pipe of baking shelf(MPa)≤0.784(8kgf/cm2)≤0.784≤0.784≤0.784≤0.784temperature inside chamber(°C)≤150≤150≤150≤150≤150vacuum in idle inside chamber≤30 when vacuum is 30 torr and the heating temperature is 1100C,vaporized rate of water(kg/m2.h)7.2 if use condensator,type and power of vacuum pump(kW)2X-15A 2kW2X-30A 3kWW3 5.5kWW3 7.5kW2X-70A 7.5kWif not use condensator,type and power of vacuum pump(kW)SK-0.8 2.2kWSK-3 5.5kWSK-3 5.5kWSK-3 7.5kWSK-3 7.5kWweight of drying chamber(kg)25060080010002100The above mentioned data is for reference only.

YZG/FZG Series vacuum drier